Arctic and Antarctic Animals Collection - 14 Piece 3MF Digital Files (Large + Small)

DIGITAL 3D PRINT FILES ONLY - NO PHYSICAL ITEM WILL BE SENT.

ARCTIC AND ANTARCTIC ANIMALS COLLECTION - 14 PIECE SET
Large and Small native colour 3MF files included together.

Explore polar animals with a matching collection of fourteen flat-backed standing designs, including a polar bear, penguin, seal, walrus, orca, fox, hare, wolf, reindeer, musk ox, owl, puffin, beluga and narwhal. Use your own prints for animal naming, sorting, counting and imaginative small-world play at home, nursery or in your own classroom. Large and Small files are included in one download.

WHAT THE 14 DESIGNS MAKE
- Polar Bear, with White coat, Grey details and Black paw pads.
- Penguin, with Black/White plumage and Orange beak and feet.
- Seal and Walrus, with short inset whiskers and fixed broad flippers.
- Orca Whale, Beluga Whale and Narwhal, each on a rounded Blue water backing.
- Arctic Fox, Arctic Hare and Arctic Wolf.
- Reindeer, with shorter, thicker rounded antlers joined broadly to the head.
- Musk Ox, with supported curved horns and shaggy-coat lines.
- Snowy Owl, with feather details and a short broad beak.
- Puffin, with a shorter rounded Orange striped bill and White cheek.

The three whales include the latest extra Blue water around their bodies and tails; the narwhal tusk has joined water backing too. The outline cleanups, rounded puffin bill and thicker reindeer antlers are included. These are stylised flat-backed standing pieces with fixed relief on continuous solid backing, rather than fully rounded animal figurines. Tusks, horns, flippers, bills and other details stay attached; there are no moving or loose parts. This is a mixed polar-themed collection: the penguin represents Antarctic wildlife, rather than every animal sharing one habitat.

WHAT IS INCLUDED
- 14 individual native Snapmaker U1 colour 3MF projects in Large.
- 14 individual native Snapmaker U1 colour 3MF projects in Small.
- 28 native projects in clearly labelled size folders, together in ONE ZIP.
- Getting-started instructions, measured dimensions, colour/head guide and use terms.
- Each project makes one assembled fixed-relief piece; keep its colour parts together.
- No STL files, full multi-bed collection project or pre-sliced G-code included.

WHAT THE FILES MAKE AND APPROXIMATE SIZES
HEIGHT x WIDTH x THICKNESS in centimetres. Saved model dimensions; actual prints may vary.
- Polar Bear: Large 9.75 x 6.58 x 1.48 cm; Small 6.50 x 4.39 x 0.98 cm.
- Penguin (Antarctic Guest): Large 9.75 x 7.14 x 1.48 cm; Small 6.50 x 4.76 x 0.98 cm.
- Seal: Large 9.75 x 10.72 x 1.48 cm; Small 6.50 x 7.15 x 0.98 cm.
- Walrus: Large 9.75 x 10.72 x 1.48 cm; Small 6.50 x 7.15 x 0.98 cm.
- Orca Whale: Large 9.75 x 20.47 x 1.48 cm; Small 6.50 x 13.65 x 0.98 cm.
- Arctic Fox: Large 9.75 x 6.79 x 1.48 cm; Small 6.50 x 4.53 x 0.98 cm.
- Arctic Hare: Large 9.75 x 5.87 x 1.48 cm; Small 6.50 x 3.91 x 0.98 cm.
- Arctic Wolf: Large 9.75 x 6.97 x 1.48 cm; Small 6.50 x 4.65 x 0.98 cm.
- Reindeer: Large 9.75 x 6.64 x 1.48 cm; Small 6.50 x 4.43 x 0.98 cm.
- Musk Ox: Large 9.75 x 8.36 x 1.48 cm; Small 6.50 x 5.57 x 0.98 cm.
- Snowy Owl: Large 9.75 x 6.87 x 1.48 cm; Small 6.50 x 4.58 x 0.98 cm.
- Puffin: Large 9.75 x 8.19 x 1.48 cm; Small 6.50 x 5.46 x 0.98 cm.
- Beluga Whale: Large 9.75 x 23.29 x 1.48 cm; Small 6.50 x 15.52 x 0.98 cm.
- Narwhal: Large 9.75 x 26.29 x 1.48 cm; Small 6.50 x 17.53 x 0.98 cm.

SIZE GUIDE
All fourteen animals are 9.75 cm high in Large and 6.5 cm high in Small, including any attached water or standing base. These are finished HEIGHTS, not widths. Projects are already scaled; do not apply another percentage reduction.

COLOURS AND PHYSICAL HEADS
Every piece uses FOUR physical colours. Black is head 1 and White is head 2 throughout. Swap head 3/4 spools BETWEEN projects as listed below; keep all colour parts assembled.
Polar Bear: head 1 Black, head 2 White, head 3 Grey, head 4 Beige
Penguin (Antarctic Guest): head 1 Black, head 2 White, head 3 Orange, head 4 Beige
Seal: head 1 Black, head 2 White, head 3 Grey, head 4 Blue
Walrus: head 1 Black, head 2 White, head 3 Brown, head 4 Beige
Orca Whale: head 1 Black, head 2 White, head 3 Grey, head 4 Blue
Arctic Fox: head 1 Black, head 2 White, head 3 Grey, head 4 Beige
Arctic Hare: head 1 Black, head 2 White, head 3 Grey, head 4 Beige
Arctic Wolf: head 1 Black, head 2 White, head 3 Grey, head 4 Beige
Reindeer: head 1 Black, head 2 White, head 3 Brown, head 4 Beige
Musk Ox: head 1 Black, head 2 White, head 3 Brown, head 4 Beige
Snowy Owl: head 1 Black, head 2 White, head 3 Beige, head 4 Grey
Puffin: head 1 Black, head 2 White, head 3 Orange, head 4 Grey
Beluga Whale: head 1 Black, head 2 White, head 3 Grey, head 4 Blue
Narwhal: head 1 Black, head 2 White, head 3 Grey, head 4 Blue

PRINTING AND COMPATIBILITY
Native colour 3MF projects for Snapmaker U1 and Snapmaker Orca. Open each 3MF AS A PROJECT to retain assembled colour parts and saved settings. Print flat back down, coloured face up. A compatible multi-colour printer, slicer, filament and experience are required. Other printers or slicers may need manual profile, colour and placement changes; universal compatibility is not promised. No Bambu-specific version is supplied.

SAVED SETTINGS
Complete Generic PLA starting profiles: 220 C nozzle / 65 C textured PEI bed, 3 walls, 10% gyroid and saved flow/cooling settings. Review profiles, colours, placement, adhesion and support needs before slicing.

PLEASE NOTE
CAD geometry checks have been completed, but these files have not been sliced or physically print, strength or stability-tested. Make trial prints before the complete set. Rounded edges and continuous backing do not guarantee against breakage or tipping. CAD checks do not certify a finished print as a tested toy. Inspect completed pieces for damage, sharp edges or loose details before supervised storytelling use with children aged 3+. Keep prints away from direct heat. Paws, ears, tails, antlers, horns, tusks, bills, flippers and water details are fixed relief on continuous backing. There are no loose whiskers or moving parts.

Images are renders of actual model geometry, not photographs of finished prints. Overview panels show the designs rather than a shared-scale arrangement. Print-bed images show actual saved scale and placement on separate 270 x 270 mm beds, not sliced toolpaths. No physical models, display props, printer or filament are supplied. Colours and results depend on your setup.

AI DISCLOSURE
AI-assisted CAD tools were used in developing these model files. Listing previews are rendered from actual model geometry.

USE LICENCE
Personal and educational use, including your own classroom or nursery. Selling physical prints requires the separate PlayGreener Shop-Wide Commercial Print Licence for your business. Model bundles are purchased separately. Digital files must not be shared, given away, uploaded or resold, including modified versions. Keep your purchase receipts.