Sleeping Beauty Collection - 14 Piece 3MF Digital Files (Standard + Small)

DIGITAL 3D PRINT FILES ONLY - NO PHYSICAL ITEM WILL BE SENT.

SLEEPING BEAUTY COLLECTION - 14 PIECES
Both Standard and Small versions included, kept in TWO separate ZIP downloads.

Bring the traditional Sleeping Beauty fairy tale to small-world storytelling. Print the princess in her vintage pink dress, the prince, king, queen, two fairies and old spinner. Add an enchanted castle, woodland cottage, royal bed, cradle, spinning wheel, rose hedge and open storybook for retelling, sequencing and imaginative adventures at home, nursery or in your own classroom.

WHAT THE 14-PIECE SET MAKES
- Sleeping Beauty with a vintage pink dress, rounded puff sleeves, white collar, waist bow and fuller skirt; Prince in blue.
- King in blue with a white beard; Queen in purple.
- Kind Fairy with supported white wings and a fixed wand; Unkind Fairy with a rounded purple cap; Old Spinner with white hair and glasses.
- Enchanted Castle and Woodland Cottage.
- Royal Bed with a fixed sleeping-princess relief, Royal Cradle and Spinning Wheel.
- Enchanted Rose Hedge and Open Storybook.

Rounded faces, closed hands, matching low rounded shoes and fixed coloured relief on continuous backing match the other PlayGreener story collections. These are flat-backed standing pieces, rather than fully rounded figurines. Crowns, wings, wand, rose details and spinning-wheel spokes/thread are attached relief. The sleeping princess is fixed to the bed, not an extra removable figure. Individual and complete-set layouts make the SAME fourteen pieces. No story text, book illustrations, loose accessories or working mechanisms are included.

WHAT YOUR DOWNLOAD INCLUDES
- One Standard ZIP and one Small ZIP. Both versions included, with files kept separate.
- Each ZIP contains 14 individual native colour 3MF projects and one complete 14-piece set on 14 named print beds.
- 15 native projects per size, 30 across the two downloads.
- Individual and complete-set projects are alternative layouts, rather than extra pieces.
- Getting-started instructions, measured dimensions, colour/head guide and use terms.
- Native Snapmaker U1 colour 3MF files only. No STL or pre-sliced G-code supplied.

APPROXIMATE FINISHED MODEL SIZES
HEIGHT x WIDTH x THICKNESS in centimetres. Saved dimensions; actual prints may vary.
- Sleeping Beauty: Standard 9.75 x 6.80 x 1.48 cm; Small 6.50 x 4.53 x 0.98 cm.
- Prince: Standard 9.75 x 5.51 x 1.48 cm; Small 6.50 x 3.67 x 0.98 cm.
- King: Standard 9.75 x 5.51 x 1.48 cm; Small 6.50 x 3.67 x 0.98 cm.
- Queen: Standard 9.75 x 5.74 x 1.48 cm; Small 6.50 x 3.83 x 0.98 cm.
- Kind Fairy: Standard 9.75 x 9.28 x 1.48 cm; Small 6.50 x 6.19 x 0.98 cm.
- Unkind Fairy: Standard 9.75 x 5.37 x 1.48 cm; Small 6.50 x 3.58 x 0.98 cm.
- Old Spinner: Standard 9.75 x 5.74 x 1.48 cm; Small 6.50 x 3.83 x 0.98 cm.
- Enchanted Castle: Standard 13.00 x 11.89 x 1.96 cm; Small 9.75 x 8.91 x 1.47 cm.
- Woodland Cottage: Standard 13.00 x 14.66 x 1.97 cm; Small 9.75 x 11.00 x 1.48 cm.
- Royal Bed with Sleeping Princess: Standard 9.75 x 9.75 x 1.48 cm; Small 9.75 x 9.75 x 1.48 cm.
- Royal Cradle: Standard 9.75 x 10.50 x 1.48 cm; Small 9.75 x 10.50 x 1.48 cm.
- Spinning Wheel: Standard 9.75 x 9.47 x 1.48 cm; Small 9.75 x 9.47 x 1.48 cm.
- Enchanted Rose Hedge: Standard 9.75 x 14.39 x 1.47 cm; Small 9.75 x 14.39 x 1.47 cm.
- Open Storybook: Standard 9.75 x 11.53 x 1.47 cm; Small 9.75 x 11.53 x 1.47 cm.

SIZE GUIDE
Standard: seven standing characters are 9.75 cm high; enchanted castle and woodland cottage are 13 cm. Small: seven standing characters are 6.5 cm high; castle and cottage are 9.75 cm. Royal bed, cradle, spinning wheel, rose hedge and open storybook stay 9.75 cm high in BOTH sizes. These are finished heights. Uniform XYZ sizing is already saved; do not reduce again.

COLOURS AND PHYSICAL HEADS
Up to four physical colours per bed, with ten virtual swatches across the complete project. Black is head 1 throughout. White is not used on every bed. Change spools BETWEEN prints according to each saved bed map. Sleeping Beauty uses Black, White, Beige and Pink. Red is a retained virtual profile slot, unused by this set.
Bed 1, Sleeping Beauty: head 1 Black, head 2 White, head 3 Beige, head 4 Pink.
Bed 2, Prince: head 1 Black, head 2 White, head 3 Beige, head 4 Blue.
Bed 3, King: head 1 Black, head 2 White, head 3 Beige, head 4 Blue.
Bed 4, Queen: head 1 Black, head 2 White, head 3 Beige, head 4 Purple.
Bed 5, Kind Fairy: head 1 Black, head 2 White, head 3 Beige, head 4 Pink.
Bed 6, Unkind Fairy: head 1 Black, head 2 White, head 3 Beige, head 4 Purple.
Bed 7, Old Spinner: head 1 Black, head 2 White, head 3 Beige, head 4 Brown.
Bed 8, Enchanted Castle: head 1 Black, head 2 White, head 3 Brown, head 4 Pink.
Bed 9, Woodland Cottage: head 1 Black, head 2 White, head 3 Brown, head 4 Purple.
Bed 10, Royal Bed with Sleeping Princess: head 1 Black, head 2 White, head 3 Beige, head 4 Pink.
Bed 11, Royal Cradle: head 1 Black, head 2 White, head 3 Brown, head 4 Pink.
Bed 12, Spinning Wheel: head 1 Black, head 2 White, head 3 Brown, head 4 Yellow.
Bed 13, Enchanted Rose Hedge: head 1 Black, head 2 Brown, head 3 Green, head 4 Pink.
Bed 14, Open Storybook: head 1 Black, head 2 White, head 3 Brown, head 4 Pink.

PRINTING AND COMPATIBILITY
Native colour 3MF projects for Snapmaker U1 and Snapmaker Orca. Open AS A PROJECT to keep assembled colour parts, named beds and saved settings. Print flat back down, coloured face up. A compatible multi-colour printer, slicer, filament and experience are needed. Other printers or slicers may require manual profile, colour and placement changes; universal compatibility is not promised. No Bambu-specific version is supplied.

SAVED SETTINGS
Complete Generic PLA starting profiles: 220 C nozzle / 65 C textured PEI bed, 3 walls, 10% gyroid and saved flow/cooling settings. Review profiles, colours, placement, adhesion and support needs before slicing. Print one bed at a time; change spools between beds as needed.

PLEASE NOTE
CAD geometry, dimensions, colour maps and bed placement have been checked. These files have not been sliced or physically print, strength or stability-tested. Make trial prints before the complete set. Rounded outlines and continuous backing do not guarantee against breakage or tipping. CAD checks do not certify a finished print as a tested toy. Inspect completed pieces for damage, sharp edges or loose details before supervised small-world play with children aged 3+. Keep finished PLA prints away from direct heat.

Images are renders of actual model geometry, not photographs of finished prints. Model panels show the designs rather than a shared-scale arrangement. Print-bed images show actual saved scale and placement on 270 x 270 mm beds, not sliced toolpaths. No physical models, display props, printer or filament are supplied. Colours and results depend on your setup.

AI DISCLOSURE
AI-assisted CAD tools were used in developing these model files. Listing previews are rendered from actual model geometry.

USE LICENCE
Personal and educational use, including your own classroom or nursery. Selling physical prints requires the separate PlayGreener Shop-Wide Commercial Print Licence for your business. Model bundles are purchased separately. Digital files must not be shared, given away, uploaded or resold, including modified versions. Keep your purchase receipts.